Catalog 21 Page 450 Panels & Doors

For the most up to date information on 80/20 products visit / 450 Panels & Doors PANELS & DOORS Motion within the T-slot Door glides and roller wheels slide within the T-slot channel to enable movement of a door, panel, frame or other component. Create accessible displays or an entrance with a bi-fold door. Tips for Ordering Panels Panel Orientation: When ordering panels it is important to indicate orientation: PLEASE NOTE A DRAWING IS REQUIRED Textured Side: Panels like Kydex and ABS Haircell have a textured and smooth side. When machining is needed it s important to indicate which is outward with T for textured or S for smooth. Machining Reference: Beginning with the upper left corner, call outs are designated A, B, C, and D in a counterclockwise direction on panels. Referencing these call outs when ordering machining allows for proper measuring of the service position. In this example, the service center line is measured down from A. A B C D Glides are simple to use and bolt directly to a prole end to freely rotate as the door or application pivots. There is an option available that creates a bi-fold door without the use of a bottom rail. Roller wheels mount directly to a T-slot or prole end and are ideal for guided linear motion. They are made of self- lubricating nylon with a permanent lubricated bushing available which reduces maintenance time and cost. GLIDES R LLERS Expanded Metal: Specify horizontal or vertical diamond orientation. Phenolic Resin: Specify horizontal or vertical woodgrain orientation. Twin Wall Polycarbonate: Specify horizontal or vertical channel orientation.

Previous Page
Next Page